Framed panel
Round galvanized tube supports woven diamond mesh. The reference construction uses one horizontal and one vertical center reinforcement.
Installed panel system
Factory-direct temporary fence supply
Temporary Chain Link Fence Panels
We manufacture preassembled, movable chain link fence panels for US distributors, contractors, rental fleets and project buyers. Panels, feet, couplers, braces, gates and export packing can be quoted as one compatible system.
- Panel options: common 6 × 10 ft configuration plus custom sizes.
- Galvanized construction: tubular frames with woven chain-link mesh.
- Matched accessories: twin-socket feet, butterfly couplers, braces and gates.
- Factory supply: bulk production, OEM/ODM review and container packing.
Product typePreassembled movable panel
Supply modelBulk order / custom quote
Include panel size, quantity and destination port for a faster factory quotation. We do not offer US local rental or on-site installation services.
Reference size6 ft × 10 ft
Panel systemPreassembled & movable
MeshWoven chain link
FinishGalvanized options
AccessoriesStands, clamps, braces, gates
Sales modelBulk order / factory RFQ
One product, quoted as a system
What Is a Temporary Chain Link Fence Panel?
It is a freestanding fence section with chain-link fabric secured inside a tubular frame. Adjacent panels connect with clamps and stand on removable feet, so a project can install, relocate and store the fence without setting permanent line posts.
Twin-socket foot
At a panel joint, adjacent uprights insert into the paired sockets of a low rectangular tubular foot. A flat steel foot can be reviewed as an alternate.
Butterfly coupler
A two-loop galvanized connector joins adjacent panel uprights. We confirm tube OD, coupler profile and fastener before production.
Brace and ballast
Bracing and counterweights are quoted separately because site exposure, privacy screening and ground conditions change stability needs.
Access gate
Pedestrian and vehicle openings can be matched to the panel height, frame, latch and project access plan.
Export packing
Panel racks, separated hardware and loading records help importers count, unload and distribute a complete system.
US-market reference range
Typical Customizable Specifications
These are common market-reference options, not a fixed TOPSFENCE stock list. Final specifications, tolerances, quantity, packing and price are subject to drawing review and quotation confirmation.
| Item | Typical customizable range | What to confirm in the RFQ |
|---|---|---|
| Panel size | 6 × 10 ft common 6 × 8 ft, 6 × 12 ft and 8 × 10 ft references | Finished height × width, quantity and allowable tolerance |
| Frame tube | Approx. 1¼–1⅝ in OD 1⅜ in, 16 ga is a common US reference | Outside diameter, wall/gauge convention and brace layout |
| Chain-link wire | Approx. 9–12.5 ga market references | Actual wire diameter in inches/mm; coated and core gauge definitions can differ |
| Mesh opening | Approx. 2–2¾ in diamond mesh | Clear opening, selvage and mesh-to-frame attachment method |
| Center support | One horizontal + one vertical reinforcement in the reference panel | Panel handling cycle, target rigidity and approved drawing |
| Surface finish | Pre-galvanized or hot-dip galvanized options | Process, zinc/coating requirement and exposed environment |
| Panel connection | Butterfly coupler / two-loop connector with fastener | Tube OD, connector profile and quantity per joint |
| Feet and stability | Twin-socket rectangular tubular foot or flat steel foot reference | Socket dimensions, surface, fence line, screening and site assessment |
| Gate options | Pedestrian and vehicle access configurations | Clear opening, swing direction, latch, hinges and support arrangement |
| MOQ / lead time | Quotation-specific | Required quantity, delivery window, destination port and packing method |
Decisions before unit price
Configure the Panel, Then Match the Accessories
Two panels with the same 6 × 10 ft label can differ in tube, wire, mesh, welding, galvanizing, brace design and connection details. A useful comparison keeps those variables visible.
Tube, wire and brace
Choose a reference drawing based on handling frequency, expected service conditions and compatibility—not size alone.
Stand and clamp fit
Send measured tube OD, stand socket and coupler details when new panels must connect with an existing fleet.
Bracing and screening
Privacy fabric increases wind load. Final brace spacing and ballast must follow the project’s site-specific stability assessment.
Gates and openings
State pedestrian and vehicle opening widths separately so hinges, latches, frames and support parts are not missed.
Galvanizing requirement
Compare the specified process and measurable coating requirement rather than relying on the word “galvanized” alone.
Rack and container plan
Panel rack size, accessory pallets, unloading method and destination determine practical packing and loading decisions.
Best-fit applications
For Buyers Who Need a Reusable Above-Ground Panel System
Build a repeatable panel-and-accessory specification for wholesale inventory or project supply.
Plan perimeter panels, access gates, bracing and packing around project quantities and site logistics.
Review frame and hardware compatibility before adding replacement panels or accessories to an existing fleet.
Request drawing-controlled production, inspection records and an itemized export packing plan.
Intent boundary: this page covers manufactured panel supply. For local rental, local installation or “near me” service, use a qualified provider in the project area.
From drawing to container
How We Prepare a Custom Factory Quotation
We treat the panel and accessories as a controlled set. The quotation should make the buyer’s assumptions visible before production begins.
- 01
Specification review
We check panel dimensions, tube, wire, mesh, finish, brace design, stands, clamps, gates, quantity and destination.
- 02
Drawing and sample alignment
For OEM/ODM or fleet matching, we compare drawings, photos and measured connection points before confirming the quote.
- 03
Production and inspection plan
We define the agreed checkpoints for dimensions, visible workmanship, connections, finish and order counting.
- 04
Packing and loading plan
Panels, stands, clamps, braces and gate hardware are separated into countable packing units for export handling.
Export-ready organization
Pack Panels and Small Parts for Counting and Unloading
Our packing plan is confirmed against the approved system and container assumptions. It can separate panels, twin-socket feet, butterfly couplers and any approved optional hardware so the buyer can check the shipment by item.
- Panel racks or bundles with protected contact points
- Separate twin-socket foot pallets
- Labelled coupler and fastener cartons
- Packing list and loading photos when included in the order requirement
The adjacent reference photo shows the product stacking approach. Final rack design, protection and loading quantity depend on confirmed specifications and container planning.
Get a comparable quote
Temporary Chain Link Fence RFQ Checklist
Even a partial buying list is useful. We will identify the open items instead of silently assuming them.
01Panel dimensions
Height × width, center support and quantity.
02Frame tube
OD, wall or gauge convention and reference drawing.
03Chain-link mesh
Wire diameter, opening, selvage and attachment.
04Surface finish
Galvanizing process and measurable coating requirement.
05Accessories
Stands, clamps, braces, counterweights and gates.
06Logistics
Destination port, delivery window and packing needs.
Buyer questions
Temporary Chain Link Fence Panel FAQ
Answers below describe our quotation workflow and common market configurations. They are not local installation engineering advice.
Are temporary chain link fence and temporary chain link fence panels the same product?+
On this page, yes. Both terms describe the preassembled movable panel system made from a tubular frame and woven chain-link mesh, used with removable stands, clamps and optional bracing or gates.
Can you quote 6 ft × 10 ft temporary chain link fence panels?+
Yes. A 6 × 10 ft panel is the main US-market reference configuration for this page. Send the required tube, wire, mesh, brace, stand, clamp and finish details—or send an existing drawing for review.
Do you supply stands, clamps, braces and gates?+
We can quote those items with the panels. Compatibility is confirmed using tube OD, stand socket, clamp dimensions, gate opening and the approved system drawing.
Can you match panels already used in our rental fleet?+
We can review measured samples, drawings and clear photos for an OEM/ODM quotation. Exact interchangeability should be confirmed against the agreed dimensions and a preproduction approval process.
What is the price of a temporary chain link fence panel?+
We do not publish a fixed price because tube, wire, mesh, finish, accessories, quantity, packing and destination all affect the quotation. Send those inputs for a project-specific price.
Do you rent or install temporary fencing in the United States?+
No. We are a manufacturer and exporter for B2B product supply. Local rental, permits, site engineering and installation must be handled by qualified providers in the project area.
Can privacy screen be added to the panels?+
Screening can change wind load and stability requirements. State the screen type and site conditions in the RFQ; final bracing, ballast and use must follow a project-specific assessment.
Request a quote
Send Your Temporary Chain Link Fence Specs
Share panel size, quantity, tube, mesh, finish, stands, clamps, braces, gates and destination. We will reply with a practical factory quotation and identify any missing decisions.
- Email: ls20240227@gmail.com
- Number/WhatsApp: +86 15932731014
- Product: temporary chain link fence panels, stands, clamps, braces, gates and export packing